Journal Menu
Archive
Last Edition

SYSTEM APPROACH TO ASSESSMENT OF THERMAL STRESS OF UNITS OF TRANSMISSIONS

Authors:

Alexander Pastukhov1

, Evgeny Timashov2, Tatyana Parnikova1

1Belgorod State Agricultural University named after V. Gorin, Russia
2Belgorod University of Cooperation, Economics and Law, Russia

Received: 16.02.2017.
Accepted: 31.05.2017.
Available: 30.06.2017.

Abstract:

In the article the application of system approach to the study of thermal stress of units of transmissions of transport and technological machines on the example of cardan joints is considered. The authors carried out the analysis of parameters of diagnosing of cardan joints for the purpose of assessment of their technical condition, in particular, assessment methods on bearing clearance in bearing mount assemblies and in vibration parameters. On the other hand, in the transport equipment diagnosing methods on temperature condition of the work of a unit are widely known. For justification of the practical application of system approach to the solution of problems of preliminary treatment of cardan joints and increase in their reliability the consideration of a unit at three hierarchical levels is necessary: the first is defined by workflows in a bearing mount assembly, the second – directly in the cardan joint, and the third – by workflows of the cardan joint as a part of the drive line. Adaptation of system approach in studying of temperature condition of cardan joints allows to prove the modes of increase in reliability of cardan joints by optimization of their thermal conditions.

Keywords:

Thermal stress, cardan joint,preliminary treatment,reliability, system approach

References:

[1] R.I. Lee, I.J. Tairov, A.V. Bocharov, Improving the durability of the bearing units, the recovered polymer materials by providing thermal balance, Vestnik MichGAU, 1(2), 2006: рp.90-94.
[2] A.G. Pastukhov, A.V. Efimtsev, Radial clearance in the universal joints of the tractor “JOHN DEERE” to operate, Bulletin of the Federal state educational institution of higher professional education Moscow State Agroengineering University named V.P. Goryachkin, 13(1), 2013: рp.67-70. (In Russian).
[3] A.G. Lepech, G.A. Sproge, Comparative analysis of methods of the technical condition of the object, Technical and technological problems of service, 10(2), 2016: pp.22-39.
[4] A.S. Terekhov, System approach to the study of the temperature regime of the transmission units, Automotive industry, 59 (5), 1979: рp.21-23. (In Russian).
[5] M. I. Lysov, Cardan mechanisms, Mashgiz Publishing house, Moscow, 1945: p.160. (In Russian)
[6] The method of accelerated tests cardan gear machines, The governing technical material RTM 23.2.74-79, VISKhOM, Moscow, 1980: p.40.
[7] S. L. Optner, System analysis for solving business and industrial problems, Soviet radio, Moscow, 1969: p.216. (In Russian)
[8] V.I. Kravchenko, V.A. Struk, G.A. Kostyukovich, E.V. Ovchinnikov, New materials and technologies used in the production of cardan transmission, Bulletin of the Belarusian-Russian University, 2(4), 2006: pp.91-98.
[9] A.M. Sigaev, A.G. Pastukhov, Universal joint, Patent RU No.22106548, 10 March 1998.
[10] P.A. Udovidchic, N.T. Mynchenya, L.I. Boyko, V.F. Isakov, M.I. Rabetsky, Asynchronous cross u-joint, A.S. USSR Patent No.1712699, 15 February 1992.
[11] P.A. Udovidchic, Yu.V. Skorynin, N.T. Mynchenya, M.I. Astanovsky, Asynchronous universal joint, A.S. USSR Patent No.1249217, 07 August 1986.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0)

Volume 10
Number 1
March 2025

Loading

Last Edition

Volume 10
Number 1
March 2025

How to Cite

A. Pastukhov, E. Timashov, T. Parnikova, System Approach to Assessment of Thermal Stress of Units of Transmissions. Applied Engineering Letters, 2(2), 65-68.

More Citation Formats

Pastukhov, A., Timashov, E., & Parnikova, T. (2017). System Approach to Assessment of Thermal Stress of Units of Transmissions. Applied Engineering Letters, 2(2), 65-68.

Alexander, Pastukhov, et al. “System Approach to Assessment of Thermal Stress of Units of Transmissions.“ Applied Engineering Letters, vol. 2, no. 2, 2017, pp. 65-68.

Pastukhov, Alexander, Evgeny Timashov, and Tatyana Parnikova. 2017. “System Approach to Assessment of Thermal Stress of Units of Transmissions.“ Applied Engineering Letters, 2 (2), 65-68.

Pastukhov, A., Timashov, E. and Parnikova, T. (2017). System Approach to Assessment of Thermal Stress of Units of Transmissions. Applied Engineering Letters, 2(2), 65-68.

SYSTEM APPROACH TO ASSESSMENT OF THERMAL STRESS OF UNITS OF TRANSMISSIONS

Authors:

Alexander Pastukhov1

, Evgeny Timashov2, Tatyana Parnikova1

1Belgorod State Agricultural University named after V. Gorin, Russia
2Belgorod University of Cooperation, Economics and Law, Russia

Received: 16.02.2017.
Accepted: 31.05.2017.
Available: 30.06.2017.

Abstract:

In the article the application of system approach to the study of thermal stress of units of transmissions of transport and technological machines on the example of cardan joints is considered. The authors carried out the analysis of parameters of diagnosing of cardan joints for the purpose of assessment of their technical condition, in particular, assessment methods on bearing clearance in bearing mount assemblies and in vibration parameters. On the other hand, in the transport equipment diagnosing methods on temperature condition of the work of a unit are widely known. For justification of the practical application of system approach to the solution of problems of preliminary treatment of cardan joints and increase in their reliability the consideration of a unit at three hierarchical levels is necessary: the first is defined by workflows in a bearing mount assembly, the second – directly in the cardan joint, and the third – by workflows of the cardan joint as a part of the drive line. Adaptation of system approach in studying of temperature condition of cardan joints allows to prove the modes of increase in reliability of cardan joints by optimization of their thermal conditions.

Keywords:

Thermal stress, cardan joint,preliminary treatment,reliability, system approach

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0)

Volume 10
Number 1
March 2025

Loading

Last Edition

Volume 10
Number 1
March 2025

live macau
live macau 5D
live macau
live macau
live macau
live macau
live sdy lotto
Live sdy
Live hk lotto
Live hk lotto
Live china
Live japan
Live Draw Sgp
Live taiwan
Live taiwan
Live cambodia
Live cambodia
situs toto
jatimtoto
jatimtoto
jatim toto
bandar toto macau
cheat slot
bandar toto macau
paito macau
paito sydney
paito singapore
paito hk
roulette
slot77
rtp slot gacor hari ini
slot deposit via qris
demo slot majong ways
rtp slot gacor hari ini