Analysis of roughness parameters of lateral back surfaces of model hob milling tools during cylindrical gear cutting

SCImago Journal Rank
2024: SJR=0.300

CWTS Journal Indicators
2024: SNIP=0.77

Vol.3, No.2, 2018: pp.63-71

ANALYSIS OF ROUGHNESS PARAMETERS OF LATERAL BACK SURFACES OF MODEL HOB MILLING TOOLS DURING CYLINDRICAL GEAR CUTTING

Authors:

Ivan Sovilj-Nikić¹, Sandra Sovilj-Nikić²

, Bogdan Sovilj¹, Ivan Samardžić³,

Dražan Kozak³, Vladimir Blanuša⁴

¹Faculty of Technical Sciences, University of Novi Sad, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia
²Iritel a.d. Beograd, Batajnički put 23, 11080 Beograd, Serbia
³Faculty of Mechanical Engineering, Ivane Brlić Mažuranić 2, 35000, Slavonski Brod, Croatia
⁴High Technical School of Professional Studies, Školska 1, 21000 Novi Sad, Serbia

https://doi.org/10.18485/aeletters.2018.3.2.3

Received: 15.01.2018.
Accepted: 02.02.2018.
Available: 30.06.2018.

Abstract:

The problem of generating is analyzed in science and practice in various ways by identifying it once as an element of the machine, and the second time as a part of production, that is, a final product. The nature of the materials of the machine elements, the loads in the contact zone, the relative velocities, the topography of the contact surfaces, and the temperature in the contact zone influence on the tribological characteristics of the elements, and hence on the characteristics of the tribo-mechanical systems. The surfaces of the tribo-mechanical elements of the machines through which mutual contact is realized are essentially thin layers of materials whose composition and properties differ significantly from the properties of the basic mass element material. There are a significant number of tribo-mechanical systems in the energy sector. Gear cutting is the most important operation in the production of gears. The quality of the gear cutting is one of the conditions for achieving the required quality of the work-piece. The gear is an element of a large number of tribo-mechanical systems. The geometrical parameters of the hob milling, the accuracy of the profiling and the accuracy of manufacture significantly affect the productivity and machining costs. In this paper, the topography and roughness parameters of lateral back surfaces of the model hob milling tools are analyzed before and after cylindrical gear cutting.

Keywords:

Tribo-mechanical systems, cylindrical gear, gear and tool materials, tribological characteristics, topography, roughness, model hob milling tools

References:

[1] B. Sovilj, I. Sovilj-Nikić, D. Ješić, The effect of specific relationship between material and coating on tribological and protective features of the product. Metalurgija, 51 (1), 2012: 21-24.
[2] I. Sovilj-Nikić, B. Sovilj, M. Kandeva, V. Gajić, S. Sovilj-Nikić, S. Legutko, P. Kovač, Tribological characteristics of hob milling tools from economic aspect. Journal of the Balkan Tribological Association, 18 (4), 2012: 577-585.
[3] M. Opalić, Prijenosnici snage i gibanja. Sveučilište u Zagrebu, FSB, Zagreb, 1998.
[4] B. Karpuschewski, H.J. Pieper, Innovations in Tool Development and Manufacturing. Proceedings of 13th International Conference on Tools, 2012, Miskolc, Hungary, pp.21-26.
[5] K.-D. Bouzakis, G. Skoridatis, M. Michalidis, Innovative Methods for Characterizing Coatings Mechanical Properties. Proceedings of International Conference “The Coatings 2008“, October 2008, Kallithea, Greece
[6] I. Sovilj-Nikić, Modelovanje i optimizacija procesa odvalnog glodanja (Ph. D. Thesis). Fakultet tehničkih nauka, Novi Sad, (In Serbian – Unpublished)
[7] S. Veličković, S. Garić, B. Stojanović, A. Vencl, Tribological properties of alluminium matrix nanocomposites. Applied Engineering Letters, 1 (3), 2016: 72-79.
[8] A. Skulić, M. Bukvić, Tribological properties of piston-cylinder set in internal combustion engines. Applied Engineering Letters, 1 (1), 2016: 29-33.
[9] M. Kandeva-Ivanova, A. Vencl, D. Karastoyanov, Advanced Tribological Coatings for Heavy-Duty Applications: Case Studies. Prof. Marin Drinov Publishing House of Bulgarian Academy of Science, Sofia, 2016.
[10] M. Kandeva-Ivanova, D. Karastoyanov, B. Ivanova, E. Assenova, Tribological Interactions of Spheroidal Graphite Cast Iron Microalloyed by Tin. Prof. Marin Drinov Publishing House of Bulgarian Academy of Science, Sofia, 2016.
[11] A. Tudor, N. Sandu, I. Tounta, Tribologia contctului roata-sina. Editura Bren, Bucuresti, 2014.
[12] P. Panjan, M. Šekada, Zaščita orodij s trdimi PVD-prevlekami. Institut Jožef Stefan, Ljubljana, 2005. (In Slovenian)
[13] S. Tanasijević, Tribološki ispravno konstruisanje. Mašinski fakultet u Kragujevcu, Kragujevac, 2004. (In Serbian)
[14] B. Sovilj, Identifikacija triboloških procesa pri odvalnom glodanju (Ph. D. Thesis). Fakultet tehničkih nauka, Novi Sad, 1988. (In Serbian)
[15] L. Blunt, X. Jiang, Waviness and Primary Profile, Geometrical Product Specification. Warsaw University of Technology Printing House, Warsaw, 2001.
[16] J. Jozwik, K. Dziedzic, I. Usydus, P. Raos, HS 6-5-2 steel surface layer development in carboniteriding with zeroflow method. Technical Gazette, 23 (5), 2016: 1405-1409. https://doi.org/10.17559/TV-20150402150811
[17] B. Križan, Osnove proračuna i oblikovanja konstrukcijskih elemenata. Školska knjiga, Zagreb, 2008. (In Serbian)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0)

Volume 10
Number 1
March 2025

How to Cite

I. Sovilj-Nikić, S. Sovilj-Nikić, B. Sovilj, I. Samardžić, D. Kozak, V. Blanuša, Analysis of Roughness Parameters of Lateral Back Surfaces of Model Hob Milling Tools During Cylindrical Gear Cutting. Applied Engineering Letters, 3(2), 2018: 63–71.
https://doi.org/10.18485/aeletters.2018.3.2.3

More Citation Formats

APA

Sovilj-Nikić, I., Sovilj-Nikić, S., Sovilj, B., Samardžić, I., Kozak, D., & Blanuša, V. (2018). Analysis of Roughness Parameters of Lateral Back Surfaces of Model Hob Milling Tools During Cylindrical Gear Cutting. Applied Engineering Letters, 3(2), 63–71. https://doi.org/10.18485/aeletters.2018.3.2.3

MLA

Sovilj-Nikić, Ivan, et al. “Analysis of Roughness Parameters of Lateral Back Surfaces of Model Hob Milling Tools during Cylindrical Gear Cutting.” Applied Engineering Letters vol. 3, no. 2, 2018, pp. 63–71, https://doi.org/10.18485/aeletters.2018.3.2.3.

Chicago

Sovilj-Nikić, Ivan, Sandra Sovilj-Nikić, Bogdan Sovilj, Ivan Samardžić, Dražan Kozak, and Vladimir Blanuša. 2018. “Analysis of Roughness Parameters of Lateral Back Surfaces of Model Hob Milling Tools during Cylindrical Gear Cutting.” Applied Engineering Letters 3 (2): 63–71. https://doi.org/10.18485/aeletters.2018.3.2.3.

Harvard

Sovilj-Nikić, I., Sovilj-Nikić, S., Sovilj, B., Samardžić, I., Kozak, D. and Blanuša, V. (2018). Analysis of Roughness Parameters of Lateral Back Surfaces of Model Hob Milling Tools During Cylindrical Gear Cutting. Applied Engineering Letters, 3(2), pp.63–71. doi: 10.18485/aeletters.2018.3.2.3.