ISSN 2466-4677; e-ISSN 2466-4847
Journal Menu
Archive
Last Edition
HOW THE HEAT TREATMENT INFLUENCES CHANGES OF DIMENSIONS OF STRUCTURAL COMPONENTS
Authors:
Martin Vicen1
, Peter Fabian1, Jozef Bronček2, Mário Drbúl3
1University of Žilina, Department of Technological Engineering, Slovakia
2University of Žilina, Department of Design and Mechanical Elements, Slovakia
3University of Žilina, Department of Machining and Manufacturing Technlogies, Slovakia
Received: 06.02.2018.
Accepted: 27.02.2018.
Available: 30.06.2018.
Abstract:
The stresses in structural components can appear due to different reasons: loading, manufacturing long-time operations, etc. One of the reasons for stresses appearance is the heat treatment to which components sometimes need to be subjected. Changes in the size and shape of products are manifestations in the heat treatment. Although those changes are undesirable, they cannot be completely avoided and/or eliminated. This article deals with the effect of the heat treatment on change of the size of bearing rings. The aim was to compare the dimensions before and after the heat treatment, to find out whether the changes are within tolerance ranges or if the additional processing of components would be necessary. Another aim was to monitor the effect of layout of bearing rings on dimensions change.
Keywords:
Heat treatment, bearing rings,changing dimensions, specificvolume, bearing steel
References:
[1] P. Fabian, J. Meško, R. Nikolić, Simulation of quenching process of steels creating complex carbides. FME Transactions, 45 (4), 2017: 510-516. https://doi.org/10.5937/fmet1704510F
[2] V. Zábavník, Technology of heat treatment. Rectorate of the Technical College in Košice, 1981, p.115.
[3] J. Jech, Roller bearing steels and their heat treatment. SNTL – Technical Literature Publishing, Prague, 1968, p.300.
[4] P. Jankejech, P. Fabian, J. Bronček, Y. Sahalapko, Influence of tempering on mechanical properties of induction bents below 540°C. In Acta Mechanica et Automatica, 10 (2), 2016: 81-86. https://doi.org/10.1515/ama-2016-0013
[5] B.Liščić, H. M. Tensi, L.C.F. Canale, G.E. Totten, Quenching theory and technology, CRC Press, 2010, p.691.
[6] R. Kohar, S. Hrcek, Dynamic Analysis of a Rolling Bearing Cage with Respect to the Elastic Properties of the Cage for the Axial and Radial Load Cases. Communications, 3A (16), 2014: 74-81.
[7] B. Antoszewski, N. Radek, S. Tofil, J. Bronček, Dobór parametrów laserowej mikroobróbki powierzchniowej elementów panewek brązowych. Przeglad Elektrotechniczny, 93 (1), 2017: pp. 41-44. (In Polish). https://doi.org/10.15199/48.2017.01.11
[8] M. Vicen, P. Fabian, J. Bronček, M. Drbul, Vplyv tepelného spracovania na zmeny rozmerov ložiskových krúžkov. Proceedings of the “23rd International Seminar of PhD Students SEMDOK 2018″, 24-26 January 2018, Zuberec, Western Tatras, Slovakia, pp.177- 182. (In Slovak).
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0)
Volume 10
Number 1
March 2025
Last Edition
Volume 10
Number 1
March 2025
How to Cite
M. Vicen, P. Fabian, J. Bronček, M. Drbúl, How the Heat Treatment Influences Changes of Dimensions of Structural Components. Applied Engineering Letters, 3(2), 2018: 47–51.
https://doi.org/10.18485/aeletters.2018.3.2.1
More Citation Formats
Vicen, M., Fabian, P., Bronček, J., & Drbúl, M. (2018). How the Heat Treatment Influences Changes of Dimensions of Structural Components. Applied Engineering Letters, 3(2), 47–51. https://doi.org/10.18485/aeletters.2018.3.2.1
Vicen, Martin, et al. “How the Heat Treatment Influences Changes of Dimensions of Structural Components.” Applied Engineering Letters, vol. 3, no. 2, 2018, pp. 47–51, https://doi.org/10.18485/aeletters.2018.3.2.1.
Vicen, Martin, Peter Fabian, Jozef Bronček, and Mário Drbúl. 2018. “How the Heat Treatment Influences Changes of Dimensions of Structural Components.” Applied Engineering Letters 3 (2): 47–51. https://doi.org/10.18485/aeletters.2018.3.2.1.
Vicen, M., Fabian, P., Bronček, J. and Drbúl, M. (2018). How the Heat Treatment Influences Changes of Dimensions of Structural Components. Applied Engineering Letters, 3(2), pp.47–51. doi: 10.18485/aeletters.2018.3.2.1.
Journal Menu
Archive
HOW THE HEAT TREATMENT INFLUENCES CHANGES OF DIMENSIONS OF STRUCTURAL COMPONENTS
Authors:
Martin Vicen1
, Peter Fabian1, Jozef Bronček2, Mário Drbúl3
1University of Žilina, Department of Technological Engineering, Slovakia
2University of Žilina, Department of Design and Mechanical Elements, Slovakia
3University of Žilina, Department of Machining and Manufacturing Technlogies, Slovakia
Received: 06.02.2018.
Accepted: 27.02.2018.
Available: 30.06.2018.
Abstract:
The stresses in structural components can appear due to different reasons: loading, manufacturing long-time operations, etc. One of the reasons for stresses appearance is the heat treatment to which components sometimes need to be subjected. Changes in the size and shape of products are manifestations in the heat treatment. Although those changes are undesirable, they cannot be completely avoided and/or eliminated. This article deals with the effect of the heat treatment on change of the size of bearing rings. The aim was to compare the dimensions before and after the heat treatment, to find out whether the changes are within tolerance ranges or if the additional processing of components would be necessary. Another aim was to monitor the effect of layout of bearing rings on dimensions change.
Keywords:
Heat treatment, bearing rings,changing dimensions, specificvolume, bearing steel
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0)
Volume 10
Number 1
March 2025
Last Edition
Volume 10
Number 1
March 2025